Rheem GAS BOOSTED SOLAR WATER HEATER Specifications download pdf (Page 30)

INSTALLATION - SYSTEM

INSTALLATION STANDARDS

The water heater must be installed:

by a qualified person, and

in accordance with the installation instructions, and

in compliance with Standards AS/NZS 3500.4, AS/NZS 3000, AS 5601 or AS/NZS 5601.1 and all local

codes and regulatory authority requirements.

In New Zealand, the installation must also conform with NZS 5261 and Clause G12 of the New Zealand

Building Code.

WATER HEATER APPLICATION

This water heater is designed for use in a single family domestic dwelling for the purpose of heating potable

water. Its use in an application other than this may shorten its life.

If this water heater is to be used where an uninterrupted hot water supply is necessary for the application or

business, then there should be redundancy within the hot water system design. This should ensure the

continuity of hot water supply in the event that this water heater was to become inoperable for any reason.

We recommend you provide advice to the system owner about their needs and building backup redundancy

into the hot water supply system.

Note: AS 3498 requires that a water heater provides the means to inhibit the growth of Legionella bacteria in

potable water. This water heater can satisfy this AS 3498 requirement provided the gas booster is energised

for a sufficient period each day and the gas booster thermostat setting is 60°C or higher.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 59 60

No comments

Rheem GAS BOOSTED SOLAR WATER HEATER Specifications Page 30