Rheem GAS BOOSTED SOLAR WATER HEATER Specifications Page 15

  • Download
  • Add to my manuals
  • Print
  • Page
    / 52
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 14
TIMER OPERATION
15
TO SET ON/OFF TIMES
To set “ON” time
Press and release the “PROG” button
If the timer has been reset, then “TIMER ON”,
“– : –” and “MO TU WE TH FR SA SU” will be
displayed on the screen.
If the timer has not been reset, then the current “ON”
time program will be displayed on the screen.
Press the “DAY” button to select the days of operation.
Refer to “Functions of the Timer” on page 13.
The selected days will be displayed on the screen.
Note: There is no need to make an adjustment to the
“DAY” display if “MO TU WE TH FR SA SU” is displayed
on the screen and it is desired to set the timer function
for seven day operation.
Press the “HR” button to select the “hour on” time (Note: 24 hour clock).
Press the “MIN” button to select the “minute on” time.
To set “OFF” time
Press and release the “PROG” button.
If the timer has been reset, then “TIMER OFF”,
“– : –” and “MO TU WE TH FR SA SU” will be
displayed on the screen.
If the timer has not been reset, then the current “OFF”
time program will be displayed on the screen.
Press the “DAY” button to select the days of operation.
Refer to “Functions of the Timer” on page 13.
The selected days will be displayed on the screen.
Note: There is no need to make an adjustment to the
“DAY” display if “MO TU WE TH FR SA SU” is displayed
on the screen and it is desired to set the timer function
for seven day operation.
Press the “HR” button to select the “hour off” time (Note: 24 hour clock).
Press the “MIN” button to select the “minute off” time.
Note: Six (6) “ON” and “OFF” times are available and each can be set by following the above procedure.
It is recommended only one “ON” and “OFF” time is set.
Press and release the “TIME” button to exit the program mode. The current time is displayed. The timer
is now programmed to operate.
Note: The program automatically sets after approximately two minutes if the “TIME” button is not
pressed.
Note: If the timer is not set with an ON-OFF period, the solar water heater will not boost automatically. If the
“MAN” button is pressed to activate the manual boosting “OVERRIDE” function and an ON-OFF period has
not been set, the solar water heater will remain in boosting mode until the “MAN” button is pressed again to
deactivate the manual boosting “OVERRIDE” function (refer to “Manual Boosting “OVERRIDE” Function”
on page 16). During this time, only minimal solar gain may be achieved.
Example: Setting the “ON” time as 3:30 PM
(15:30 hours) for seven day a week boosting.
MO TU WE TH FR SA SU
TIMER
ON
15:30
TIME PROG DAY HR MIN
RANDOM
R MAN
Example: Setting the “OFF” time as 6:30 PM
(18:30 hours) for seven day a week boosting.
TIME PROG DAY HR MIN
RANDOM
R MAN
MO TU WE TH FR SA SU
TIMER
OFF
18:30
Page view 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 51 52

Comments to this Manuals

No comments