Rheem Classic Series: 80% AFUE Single-Stage PSC Motor Use and Care Manual download pdf

USER’S INFORMATION MANUAL

UPFLOW, DOWNFLOW, UPFLOW/HORIZONTAL & HORIZONTAL

ONLY INDUCED DRAFT GAS FURNACES

Recognize this symbol as an indication of Important Safety Information!

— Do not store or use gasoline or other

flammable vapors and liquids, or other

combustible materials in the vicinity of

this or any other appliance.

— WHAT TO DO IF YOU SMELL GAS

• Do not try to light any appliance.

• Do not touch any electrical switch;

do not use any phone in your

building.

• Immediately call your gas supplier

from a neighbor’s phone. Follow the

gas supplier’s instructions.

• If you cannot reach your gas

supplier, call the fire department.

• Do not rely on smell alone to detect

leaks. Due to various factors, you may

not be able to smell fuel gases.

• A U. L. recognized fuel gas and CO

detector(s) are recommended in all

applications, and their installation should

be in accordance with the

manufacturer’s recommendations and/or

local laws, rules, regulations or codes.

— Installation and service must be

performed by a qualified installer,

service agency or the gas supplier.

If the information in this manual is not followed exactly,

a fire or explosion may result, causing property

damage, personal injury or loss of life.

WARNING

92-20802-64-00

DO NOT DESTROY. PLEASE READ CAREFULLY AND KEEP IN A SAFE PLACE FOR FUTURE REFERENCE.

FOR YOUR SAFETY

IMPORTANT: READ THESE

INSTRUCTIONS THOROUGHLY

BEFORE ATTEMPTING TO OPERATE

THIS FURNACE.

This furnace has been designed to

give you many years of efficient,

dependable home comfort. With

regular maintenance, this furnace will

operate satisfactorily year after year.

Please read this manual to familiarize

yourself with operation, routine

maintenance schedule, and safety

procedures.

DEVICES ATTACHED TO THE FLUE

OR VENT FOR THE PURPOSE OF

REDUCING HEAT LOSS UP THE

CHIMNEY, INCLUDING FIELD-

INSTALLED DRAFT INDUCERS,

HAVE NOT BEEN TESTED AND

HAVE NOT BEEN INCLUDED IN THE

DESIGN CERTIFICATION OF THIS

FURNACE. WE, THE MANUFAC-

TURER, CANNOT AND WILL NOT BE

RESPONSIBLE FOR INJURY OR

DAMAGE CAUSED BY THE USE OF

SUCH UNTESTED AND/OR

UNCERTIFIED DEVICES,

ACCESSORIES OR COMPONENTS.

SAFETY

IMPROPER INSTALLATION,

ADJUSTMENT, ALTERATION,

SERVICE OR MAINTENANCE CAN

CAUSE PROPERTY DAMAGE,

PERSONAL INJURY OR DEATH.

FOR ASSISTANCE OR ADDITIONAL

INFORMATION CONSULT A

QUALIFIED INSTALLER, SERVICE

AGENCY OR THE GAS SUPPLIER.

OBSTRUCTION OF THE AIR VENT

ON AN LP (PROPANE) TANK

REGULATOR CAN CAUSE

EXPLOSION OR FIRE RESULTING IN

PROPERTY DAMAGE, SEVERE

PERSONAL INJURY OR DEATH.

YOUR GAS SUPPLIER SHOULD

PERIODICALLY INSPECT AND

CLEAN THE AIR VENT SCREEN TO

PREVENT ANY OBSTRUCTION.

KEEP PROTECTIVE REGULATOR

COVER IN PLACE, AS EXPOSURE

TO THE ELEMENTS CAN CAUSE

ICE BUILDUP AND REGULATOR

FAILURE.

CAREFULLY FOLLOW THESE

SAFETY RULES:

1. Combustible material must not be

placed on or against the furnace

jacket. The area around the

furnace must be kept clear and

free of all combustible materials

including gasoline and other

flammable vapors and liquids.

2. A furnace installed in an attic or

other insulated space must be kept

free and clear of insulating

material. Examine the furnace area

when installing the furnace or

adding more insulation. Some

materials may be combustible.

3. To prevent carbon monoxide

poisoning, all blower doors and

compartment covers must be

replaced after the furnace is

serviced. Do not operate the unit

without all panels and doors

securely in place.

4. Should overheating occur, or the

gas valve fail to shut off the gas

supply, turn off the manual gas

valve to the furnace before turning

off the electrical supply.

5. Any additions, changes or

conversions required in order for

the furnace to satisfactorily meet

the application needs should be

made by a qualified installer,

service agency or the gas supplier,

using factory specified or approved

parts. Read your WARRANTY.

Contact the WARRANTOR for

conversion information. This

furnace was equipped at the

factory for use on NATURAL GAS

ONLY. Conversion to L.P. GAS

requires a special kit supplied by

the WARRANTOR.

6. A furnace needs an adequate

supply of combustion and

ventilation air for proper and safe

operation. Do not block or obstruct

air openings on the furnace or air

openings supplying the area where

WARNING

1 2 3 4 5 6

Summary of Contents

Page 1 - USER’S INFORMATION MANUAL

USER’S INFORMATION MANUALUPFLOW, DOWNFLOW, UPFLOW/HORIZONTAL & HORIZONTALONLY INDUCED DRAFT GAS FURNACESRecognize this symbol as an indication of

Page 2 - SYSTEM OPERATION INFORMATION

2the furnace is installed. Do notstore anything around the furnacethat could block the flow of fresh airto the unit. Your installation mayreceive air

Page 3 - (STANDING PILOT)

c. Allow the pilot burner to burnapproximately one-half minutebefore releasing the red pilotbutton. The pilot burner shouldremain lit. If it goes out,

Page 4 - MAINTENANCE

8. HONEYWELL VALVE: Turn onthe gas to the main burners byturning the gas control knobcounterclockwise to the “ON”position.ROBERTSHAW 7200 VALVE:Move t

Page 5 - UPFLOW FILTER SIZES

DOWNFLOW FILTER SIZESFURNACE INPUTWIDTH BTUH (K)SIZE QTY.14( 45 & 50 14( x 20( 1171⁄2( 67, 75 & 100 12( x 20( 221( 100 12( x 20( 2241⁄2( 125 &

Page 6

6 CM 594REMOVING FILTERSUPFLOW FURNACE - FILTER INBOTTOM LOCATION1. Remove the blower compartmentaccess door.2. Disengage the filter retaining rodand

Comments to this Manuals

No comments

Rheem Classic Series: 80% AFUE Single-Stage PSC Motor Use and Care Manual

Browse online or download Use and Care Manual for Thermostats Rheem Classic Series: 80% AFUE Single-Stage PSC Motor. Rheem Classic Series: 80% AFUE Single-Stage PSC Motor Use & Care Manual User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Thermostats Rheem Classic Series: 80% AFUE Single-Stage PSC Motor